Spiral Wound gaskets have become extremely popular due to a wide variety of available styles and sizes. Spiral Wound gaskets can be fabricated of any metal which is available in thin strip and which can be welded; therefore they can be used against virtually any corrosive medium dependent upon the choice of the metal and filler.
They can be used over the complete temperature range from cryogenic to approximately 2000ºF. This type gasket can be used in all pressures from vacuum to the standard 2500 psi flange ratings
Licensed Manufacturer
Lamons Gasket Co., USA
GASKETS
Alfa-Meli Oilfield Services through its associated company, Alfa-Meli Precision Industries, is a licensed manufacturer and stockist of Lamons Gaskets Co., U.S.A. They manufacture and supply all types of metallic gaskets for use in heat exchangers, valves, pumps, compressors, boilers and many other types of industrial equipment. The License Agreement with Lamons Gasket Co., USA is our commitment to manufacture quality gaskets and to stocking the widest selection of gasket materials ready for immediate production of custom gaskets.
Alfa-Meli has experienced gasket personnel and engineers ready to assist you on your special requirements. We are also supported by Lamons Gasket Co., USA whose commitment to service and quality have made them the leader in metallic gaskets in the United States and Canada.
Spiral Wound Gaskets
From ½ to over 60"
Pressure class 150# ~ 2500#
CMG Gasket
From ½" to over 60"
Lamons Gasket Company's Corrugated Metal Graphite (CMG) is a high performance gasket for standard flange or heat exchanger applications.
This gasket offers:
This gasket offers:
- High sealability
- Conformity where low bolt load is available
- Maintains high bolt loads, upon re-tightening, in heat exchanger applications
- Heavy gauge corrugated insert for support
- Choice of insert metals
Kamprofile
From ½" to over 60"
Engineering Design results in Improved Performance. The Lamons Kammpro™ is the preferred gasket when needing improved performance at low seating stresses. It features excellent anti-blowout properties associated with the reliability of a solid metal-to-metal seal combined with soft sealing face to ensure a tighter joint. Lamons Kammpro™ is an ideal replacement for problem applications associated with jacketed gaskets.
Soft Cut Gasket
From ½" to over 60"
A " Soft Gasket" material is a term used when referring to a gasket material that is easily compressed under a low bolt load. This term has been used to distinguish the difference from a metallic gasket. A soft gasket material can be selected from a large variety of rubbers (neoprene, viton, SBR, EPDM, etc.), TFE, graphite, and compressed non-asbestos sheet products.
Soft gaskets are used in a wide range of applications from pipe flange, heat exchanger, compressor and bonnet valve gaskets to name just a few. Soft gasketing material can be purchased in a variety of cut shapes or be provided in sheet or rolls.
Soft gaskets are used in a wide range of applications from pipe flange, heat exchanger, compressor and bonnet valve gaskets to name just a few. Soft gasketing material can be purchased in a variety of cut shapes or be provided in sheet or rolls.
Stockist of Ring Type Joint Gasket
Soft Iron & Stainless Steel
"RTJ" (ring type joint) gaskets are manufactured in accordance with API-6A and ANSI B16.2 specifications. API ring joints come in two basic types, oval and an octagonal shape. These basic shapes are used in pressures up to 10,000 psi. The dimensions are standardized and require specially grooved flanges.
The octagonal cross section has a higher sealing efficiency than the oval and would be the preferred gasket. RTJ's have "R" numbers assigned to them for pipe size and pressure class identification. Stock materials include soft iron, low carbon steel, 4-6 chrome (f5), 304, 304L, 316, 316L, 347, Monel, Inconel and Incoloy.
The octagonal cross section has a higher sealing efficiency than the oval and would be the preferred gasket. RTJ's have "R" numbers assigned to them for pipe size and pressure class identification. Stock materials include soft iron, low carbon steel, 4-6 chrome (f5), 304, 304L, 316, 316L, 347, Monel, Inconel and Incoloy.
